PRODUCT
Selection Method
XiCA sublimates the stability of heating films to global standards.
The way to choose the high quality heating film
Required functions | Things to be confirmed | ||
Functional section of film | Film parts | Thermal shrinkage rate when the heat generates | Check the width difference between base film and Laminex film when combined |
Structure protecting wet permeation | Check application when film was designed | ||
Adhesives when exfoliating | Check the film as exfoliating | ||
Status on insulation | Check the use of PET film for insulation not Vinyl or OPP Translucent : For insulation, anti-flammable Transparent : For general, Display |
||
Hardened | Check uniformed surface | ||
Laminating parts | Width of Copper bus bar | Protecting overheat, as wide as possible | |
Thickness of Copper bus bar | As thin as possible to protect from spark because as it is more thinner it is will not open for gap with film. | ||
Type of Copper bus bar | Conduction of electricity of Touch Pitch copper (Pure copper) is 106%, Phosphorus deoxidized bronze is 86% | ||
Allowed current | More current is allowed relative to size of thickness and width | ||
Printing parts | Uniform Carbon surface | Check the surface by over 10 times enlargement and investigate heat status | |
Design to remove spark | Apply new design for structure for protecting sparks, when heat is overloaded on carbon printed area | ||
Silver bus bar | For protecting spark of carbon and copper, Electricity resistance value for Silver bus bar should be under 0.5Ω |