We Build Loyalty by Serving Customers with Utmost Care

MANUFACTURE

Installation

Precaution

Heating Film gives customers a better value.
The process of manufacture creates the value of quality.

  • Before installing, make sure the surface of the construction must be even to prevent the film from bending, and foreign matter must be removed.
  • Install the Film without water and moisture on the surface, and perfectly removing it if there is any
  • When installing heating film, do not use glass fiber insulation pad or insulation oad with a rough surface to make sure avoid any damage on the surface of heating film .
  • Be careful that do not to drop things nor step on the film surface by shoes while working.
  • Must not use paint, colorant or hardened adhesives as a finished material due to cause of discoloration by direct heat or spilt.
  • In order to maximize the heating effect of thermal insulation pad and finishing materials, it is necessary to consult with a company specializing in insulation materials and construction engineers depending on the construction site.
  • When cutting the film, cut so that the length of one side does not exceed the specified power (Watt) value and 80% of the temperature controller capacity.
    ※ Electric power(Watt) calculation method = V² / R (v = Voltage, R = Resistance)
    ※ Heating Film installation length and temperature controller capacity
    Item Current Per ㎡ Stright Max length 4Kw thermostat capacity
    Heating Film 0.9A 50Cm*16M 50Cm*16M*2lines
    80Cm*10M 80Cm*10M*2lines
    100Cm*8M 100Cm*8M*2lines
  • Other matters related to film installation should be discussed with installation engineers and heat installation companies according to the site conditions.
  • Considering the external environment, using purpose, and predictable environmental conditions, it is recommended to add about 20% of the calculated calorific value and install it after review.