-
Is it possible to install in places in addition to floor?
Not only floor, but also wall and ceiling can be constructed.
It is possible to construct according to the construction place and situation.
-
What is the thickness of the heating film?
The heating film is composed of a base film and a laminated film, and the thickness of the film is determined by the thickness of both films.
The thickness of the film is determined by the film to compensate for the weaknesses of impact or moisture. Usually, the thickness is 0.338mm.
-
Is there a risk of short circuit or fire when moisture or wa…
Products that use electricity are weak to water, so if moisture or water enters that the product may be damaged.
-
When if the heat film is accidentally scratched?
In the case of electric under-floor heating panel, if something goes wrong, it has some bad points like it lift up the floor, connect the heating line and re-install.
On the other hand the heating film will not heat only one shorted line if the black carbon line is shorted, and the other carbon lines will beat normally.
Available without a big a/s.
-
Can anyone do construction?
Heating film is a semi-finished product and must be finished in complete product through construction work.
So construction is very important and construction can be done by training engineers who have experienced construction for a certain period of time.
-
Can I construct a large facility with a large floor area?
It is possible for kindergarten, orphanage and senior-citizen center.
-
Is it safe to sleep on the floor during operation?
Because the thermostat controls the proper temperature, there is no problem sleeping or taking a break.
-
How quickly goes the temperature up?
The biggest benefit of the heating film is the instantaneous temperature rises.
Temperature rise is 20-22℃ at room temperature.
When the insulation is attached, it will reach between 40 degrees and 60 degrees within 1 minute depending on the power consumption of the film.
During construction, the number of windows, the adiabatic state of the building, and so on, will increase rapidly.
-
Which finishing materials are best to use?
The heating film is most suitable for laminate flooring.
When using other finishing materials or wet construction, it is best to consult the opinions of an experienced operator.
-
What if I accidentally nail a heat film?
You should avoid to nail basically. The reason is that putting other conductors on the live side is a danger of short circuit and should be removed immediately.
When the nail is already in place, the surface of the film should be inspected to check for short-circuiting and sparks.
-
There are lots of products in the market, which products sho…
The heating film is chosen considering the several factors to avoid the risk of accident due to the electric product and semi-manufactured product.
The heating film is made up of film material and is heated by its function.
So, you need some knowledge to check its function in details. You should choose the product which is developed by the improvement for problem even if the shapes of the heating film look very similar.
-
What is the strength of RexVa heating film?
The heating film was manufactured by the several film manufacturers 5~6 years ago without the detailed knowledge for functions of heating film and had some problem for the products. Of them, there were the inappropriate adhesion by uneven surface when installed and the problem like the spark and limited heating which is caused partly when the electricity is connected.
Above all, it is important that these functions for heating film should be improved when manufactured.
RexVa has developed and installed these equipments in order to improve and solve the problem and has improved the many functions as you can easily recognize it in the heating film shape.
-
Is there no electromagnetic waves?
The electromagnetic waves means the waves of the electrons, in other word, there is electrons revolving around the nucleus and these small substances have its own waves. So, all the products using the electricity can generate the electromagnetic waves.
The regulation against these electromagnetic waves is for that the quantities of the generated electromagnetic waves cause harm for human body.
When export to Europe, the test for electromagnetic waves must be conducted and if you require the certificate for the test for electromagnetic waves, when you purchase it, you can easily recognize the quantities of the generation.
So, when you compare the price, it is important to use the product which has the certificate
-
Is the installation difficult?
We can say it is ‘Simple’, but you should install it after studying some knowledge because it uses the electricity.
So, it is effective that you install it with someone which has 4~5 years experience for the installation.
The strength of heating film is the wet installation that is installed by insulation, film, waterproof and strengthened wood floor in order.
-
How warm is the floor?
The heating film is the heating method using radiation heat other than the existing heating method which heats the actual floor and uses the convection of air.
The heating method by radiation heat by heating film keeps warm by far infrared waves of fresh and comfortable condition and keeps the proper temperature by the temperature controller.
